L-758D DigitalMaster - Accessories

Step Up Ring (Lens Hood) for L-758, 558, 608

Lens hood for L-758, 558, 358, 608, preventing glare when you take readings with filters.

The step-up ring (30.5mm to 40.5mm), available as an optional accessory, makes it possible to mount step rings and filters of other manufacturers. This simplifies the setting of exposure without the troublesome correction calculation of PL filters, etc. The step-up ring can also be used as a hood to protect lenses from scratching, soiling, etc.

Read more

Exposure Profile Target II

Sekonic Exposure Target II for calibrating cameras and meters - especially the Sekonic L-758DR, L-758D, L-758Cine and L-478 meters.

A 25 patch test target that gathers more information about the camera's exposure characteristics than the previous test target. It consists of two sides: An 18% Gray Card used to custom gray (white) balance digital cameras before profiling; A Profile Target consisting of a central 18% gray patch that is surrounded by 24 patches arranged in 1/6th stop values that are successively brighter and darker.

The Exposure Profile Target II offers faster, more accurate testing as it requires only three shots to gather a wide range of exposure data from the camera's imaging system. The first shot is made at the normal, metered exposure determined by a Sekonic L-758DR. The second shot is made at -3EV below the metered exposure and the third shot at +3EV above the metered exposure. Please refer to the illustrations on the next page.

To profile your camera and lens combinations, the Exposure Profile Target II is fully compatible with FREE Data Transfer Software and the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.

Read more

Exposure Profile Target

Sekonic Exposure Target for calibrating cameras and meters - especially the Sekonic L-758DR, L-758D, L-758Cine and L-478 meters.

Version 2.0 and later of the Digital Transfer Software is designed to be used with Exposure Profile Targets that have alignment marks. The alignment marks simplify and automate the selection of Profile Target images with the DTS software. If you own a Profile Target I and do not have the alignment marks, please request directly from Sekonic USA by calling the Service Department at 914-347-3300. If you live outside the USA, contact your country's distributor.

To profile your camera and lens combinations, the Exposure Profile Target I is fully compatible with FREE Data Transfer Software along with the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.

Features exposure target on front, and gray card on back for custom white balance of D-SLRs.

Read more

Sync Cord for All Meters

Sync cord for all Sekonic Meters (?Y? Cord)

3-way, 5 meter long - connects camera, light meter and flash. (Hard wired for reliability)

Read more

Gray Card

Standard gray card.

Folding standup gray card, the value at which all meters are calibrated. (Folds for convenience)

Read more

Replacement Case for L-558/758DR Meter

For L-558, L-558R & L-758DR Meters

Replace your lost or damaged case for L-558, L-558R and L-758DR meters.

Read more

Strap for Sekonic Meters

For Meters

Zoom Lens Cap for L-558 and L-758

For L-558, L-558 Cine, L-558R & L-758 Meters

Replace your lost or damaged zoom lens cap for L-558, L-558 Cine, L-558R, and L-758 meters.

Read more

Synchro Terminal Cap

Replacement synchro terminal cap

Replace your damaged or missing synchro terminal cap.

Read more

RT-32CTL Radio Transmitter Module for L-358 and L-758 series

Radio Transmitter Module for ControlTL? as well as Standard channel of PocketWizard? products.

Optional accessories for L-358/L-758D&CINE, and replacement for L-758DR.

Sekonic RT-32CTL Radio Transmitter Module provides compatibility with the PocketWizard® ControlTL® channels in addition to the original Standard triggering channels.

Compatible with both FCC (USA) and CE (Europe) frequencies, the new RT-32CTL Radio Transmitter module can be used in Sekonic wireless-ready meters and supports all ControlTL® channels available for either market system as well as ControlTL Zones (A, B, C). Both ControlTL and Standard signals are broadcast with each trigger so ControlTL and Standard radios can be used together.

This enables photographers to precisely set up dimensional lighting scenarios quickly and easily in the Studio or on location.

The RT-32CTL transmitter module is universal and can be used with either USA/North America market products or European products. Compatible with ControlTL products as well as Standard channel products of PocketWizard®.

Use for triggering PocketWizard ControlTL Products such as MiniTT1, FlexTT5, ST4, MC2. Also triggers Standard PocketWizard products such as PLUS series and MultiMAX.

PocketWizard ControlTL® radios will require a firmware update to work properly with Sekonic light meters with RT-32CTL in ControlTL mode.

The following is a list of firmware updates needed for ControlTL compatibility with the RT-32CTL:

       § PowerST4 - firmware 5.100 or later*
       § PowerMC2 - firmware 2.200 or later*
       § FlexTT5® for Canon - firmware 6.100 or later*
       § FlexTT5® for Nikon - firmware 3.100 or later*
* Available immediately for download at http://www.pocketwizard.com/support/downloads/
Please check www.PocketWizard.com for more information.

Read more

Connect with us


Blog YouTube Flickr Switch to Standard View (not optimized for mobile browsing)
Copyright © 2019 Sekonic, All rights reserved.