L-478DR-U LiteMaster Pro (for PocketWizard) - Accessories

Exposure Profile Target II

Sekonic Exposure Target II for calibrating cameras and meters - especially the Sekonic L-758DR, L-758D, L-758Cine and L-478 meters.

A 25 patch test target that gathers more information about the camera's exposure characteristics than the previous test target. It consists of two sides: An 18% Gray Card used to custom gray (white) balance digital cameras before profiling; A Profile Target consisting of a central 18% gray patch that is surrounded by 24 patches arranged in 1/6th stop values that are successively brighter and darker.

The Exposure Profile Target II offers faster, more accurate testing as it requires only three shots to gather a wide range of exposure data from the camera's imaging system. The first shot is made at the normal, metered exposure determined by a Sekonic L-758DR. The second shot is made at -3EV below the metered exposure and the third shot at +3EV above the metered exposure. Please refer to the illustrations on the next page.

To profile your camera and lens combinations, the Exposure Profile Target II is fully compatible with FREE Data Transfer Software and the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.

Read more

Exposure Profile Target

Sekonic Exposure Target for calibrating cameras and meters - especially the Sekonic L-758DR, L-758D, L-758Cine and L-478 meters.

Version 2.0 and later of the Digital Transfer Software is designed to be used with Exposure Profile Targets that have alignment marks. The alignment marks simplify and automate the selection of Profile Target images with the DTS software. If you own a Profile Target I and do not have the alignment marks, please request directly from Sekonic USA by calling the Service Department at 914-347-3300. If you live outside the USA, contact your country's distributor.

To profile your camera and lens combinations, the Exposure Profile Target I is fully compatible with FREE Data Transfer Software along with the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.

Features exposure target on front, and gray card on back for custom white balance of D-SLRs.

Read more

Sync Cord for All Meters

Sync cord for all Sekonic Meters (?Y? Cord)

3-way, 5 meter long - connects camera, light meter and flash. (Hard wired for reliability)

Read more

Gray Card

Standard gray card.

Folding standup gray card, the value at which all meters are calibrated. (Folds for convenience)

Read more

Viewfinder 5 Degree for L-478 Meters

Viewfinder 5 Degree for LiteMaster Pro L-478D and L-478DR

The Viewfinder 5 degree provides both direct flash and ambient 5 degree reflected-light, spot readings when used with the LiteMaster Pro L-478D and L-478DR meters (available separately).

  • Narrow spot readings enable reading specific areas of a subject.
  • Useful for measuring exposure for theater, sports and landscapes photography.
  • Required for using Sekonic DTS system to calibrate meter to the dynamic range of digital still and video cameras.
Read more

Sekonic / X-Rite ColorChecker Passport with Gray Balance Card

Available in USA only. ColorChecker Passort with Sekonic Gray Balance card simplifies exposure calibration of Sekonic meters. Using this special ColorChecker Passport with Sekonic’s Data Transfer Software, image makers can create an exposure profile and map out the dynamic range of their DSLR or digital video camera.

Available in USA only. ColorChecker Passort with Sekonic Gray Balance card simplifies exposure calibration of Sekonic meters. Using this special ColorChecker Passport with Sekonic’s Data Transfer Software, image makers can create an exposure profile and map out the dynamic range of their DSLR or digital video camera. Transferring this data to their Sekonic L-478 Series or L-758 Series meter enables knowing which details of a scene or subject will be properly imaged, and which will be over or under the range of the camera. Today’s photographers can now take full advantage of their camera’s imaging capabilities to produce pictures with greater tonality and clarity that they have ever known before.

Sekonic X-Rite ColorChecker Passport simplifies post processing

The Color-Checker Target enables minimizing color differences between cameras and lenses and aids in establishing true color in mixed lighting. It extends the power of Adobe® photo editing software with series of one-click warming and cooling enhancements that greatly reduce editing time.

Two ways to calibrate the L-478 meters using Sekonic’s DTS software

Incident-only calibration with Sekonic’s Data Transfer System enables creating exposure profiles for precise metering without need for additional accessories. Incident and Reflected-light calibration is possible using L-478 Series 5-degree Viewfinder, available as a separate purchase, to read the Passport’s special Sekonic (20% reflectance) gray card.

Read more

Connect with us


Blog YouTube Flickr Switch to Standard View (not optimized for mobile browsing)
Copyright © 2019 Sekonic, All rights reserved.